Set the alarm tracing of the data collection parameter

  1. Choose the tab Operations and select the operation.
  2. Choose in the tab Instructions the data collection instruction.
  3. Choose in the sub tab Data Collection Parameters the parameter.
  4. Choose the tab Alarms.
    The alarm tracing can only be set when warning levels and error levels were set. See the tab Settings.
  5. Check the warning limits and error limits that you want to trace.
  6. Click Edit Alarm to edit the severity and delay of the alarm.
    The dialog box Wizard Edit Alarm will appear.
  7. Select from the drop-down menu Severity one of the following values:
    • VERY LOW,
    • LOW,
    • NORMAL, default value
    • HIGH,
    • VERY HIGH.
  8. In Activation Delay, enter by how many seconds the activation of the alarm must be delayed.
    To avoid the constant activation of alarms during a process, a delay can be entered. The alarm will only be activated if it is still active after the delay.