Add parameters to a touch device

  1. Choose Resource Management > Devices in the Navigation Pane.
  2. Choose the tab Touch Devices in the Data Pane.
  3. Choose a touch device.
  4. Choose the vertical tab General > sub tab Parameters.
  5. In the drop-down menu select COM port, the port used by the touch device.
  6. Where applicable, in the option group Resource View Settings, edit the fields below:
    OptionExplanation
    Enable Extended Resource View Check if you want to activate an extra resource view on the second screen.
    Screen Position Select the desired position of the extra resource view screen. If FULL is selected, the extra resource view will be displayed on the second screen integrally. If required, make another choice in the drop-down menu (for example: x, y, width, height: 1280, 0, 1280, 1024 is available by default, other positions can be added project-based).
    Show Selector If checked, another resource view can be selected on the second screen via a selection bar.
  7. Choose in the option group Auto Logout Timeout one of the following options:
    OptionExplanation
    Default Timeout The device is automatically logged out after inactivity for a duration set in Objective.
    No Timeout The device is not logged out after inactivity.
    ...h ...m Enter the duration in hours and minutes after which the device should automatically log out when inactive.